CNC Controller Imported From Italy

15.6-inch LCD capacitive screen, precise touch control, provides customers with a valuable interactive programming experience.

Equipped with efficient control algorithms to optimize the working cycle of the machine, so that it can produce more workpieces in the same time.       

Frame Welding

Three-layer welding technology strengthens the welding strength of the frame, while reducing the heat input, and minimizing the amount of deformation caused by welding.

CNC Tandem Press Brake

GHBM tandem press brake is good at processing super long workpiece such as lamp post and traffic light pole; The tandem press brake is consist of two independent machines and they could run in tandem method or independently.

Double Rail Back Gauge: Accurate and Stable!

The X-axis (forward and backward) runing speed of the back  gauge can reach 350mm/s, and the repeat positioning accuracy  ≤0.05mm.The stop finger is guided by double linear guides, which is more stable!

Intelligent Bending Control System

Intelligent control system, extremely simple operation, clear parameters in one page.

Automatic Deflection Compensation Technology

Automatic mechanical deflection compensation technology is used to effectively improve the straightness of the workpiece and the accuracy of the bending angle.The compensation value is automatically calculated by the CNC controller, and the motor is electrically adjusted, saving time and effort; the mechanical wedge  design has a longer service life!

Human-computer Interaction Experience

Large-size color touch screen: good for operation and viewing! The hardware and software have been carefully debugged and matched, and the work is coordinated seamlessly to improve the performance of the whole machine. And the CNC controller supports multiple languages.

Features That Operator Like

Comprehensive and practical auxiliary functions make bending faster, more stable and safer.

Quick Released Clamp

Quick release design, you can quickly remove and install the bending mold through the quick release clamp to save your time.

Sliding Front Supporting Device

The front support device can slide left and right along the linear guide rail to provide strong support for large-size sheets.

Work Area Lighting Device

Lightening the bending operation area and enhance the work experience of the bending operator. The use of LED light strips has low power consumption, low heat generation, long life and higher brightness.

Laser Safety Protection Device(Optional)

Effectively prevent the bending mold’s clamping hands. When the upper and lower molds are clamped, if a foreign object is under the knife mold, the ram stops moving and the machine will sound an alarm.

Auto Bending Unit(Optional)

Provide a customized automatic bending unit, the robotic arm automatically works with the bending, liberating manpower.

Core Components

Servo Motor

A higher precision control is achieved through closed-loop control. Faster speed increases the overall working speed of the machine.
 

HIWIN Ball Screw＆Linear Guide From TAIWAN,CHINA

High rigidity, large load capacity, high positioning accuracy (nano-level positioning accuracy). The parts wear less and the accuracy can be maintained for a long time.

OPKON Grating Ruler From Turkey

It can perform real-time and rapid detection of the coordinates of the slider, with high speed and high accuracy as well as ensure the processing accuracy of the workpiece.

KACON Foot Switch From Korea

The pedals are resistant to high temperature, impact and abrasion. The cable connecting the foot switch is water-proof, oil-proof and shock-proof, which is safe and reliable.

Bosch Rexroth Electromagnetic Valve From Germany

Adopt a complete set of Bosch Rexroth solenoid valves and sealing accessories imported from Germany. Ensure the stability of the equipment under long-term high-load working conditions.

HAWE Oil Pump From Germany

Strong pressure keeping capacity. Stop the pump and keep the pressure for 5 minutes, and the pressure drop should not exceed 5Mpa.
 
NAME ORIGINAL COUNTRY BRAND
Machiner Frame CHINA GHBM
Oil Cylinder CHINA GHBM
Hydraulic Station CHINA GHBM
Back Gauge CHINA GHBM
Crowning System CHINA GHBM
Electrical Components FRANCE SCHNEIDER
Ballscrew TAIWAN,CHINA HIWIN
Linear Guides TAIWAN,CHINA HIWIN
Grating Ruler TURKEY OPKON
CNC System Cystem CT 12PS SWITZERLAND CYBELEC
Pedal Switch KOREA KACON
Closed Loop Hydraulic System GERMANY REXROTH
Oil Pump GERMANY ECKERLE
Main Servo Motor CHINA DP-TECH

Product Parameter

Max. Pressure

8000 KN

Dimension·Length

6600 mm
Ram Stroke

400 mm

Dimension·Depth

3400 mm
CNC Axes Y1 / Y2 / X / R / V 4+1

Dimension·Height

5300 mm
Main Motor Power

55 KW

 Bending Length

6000 mm
Ram Approach Speed

80 mm/s

Wodth Between Columns

4800 mm
Ram Working Speed

8 mm/s

 Opening Height

800 mm
Ram Return Speed 60 mm/s

Throat Depth

 500 mm
X Axis Max.Speed

300 mm/s

Throat Depth

 ≥92000 Kg
X Axis Range

600 mm

 Y1、Y2 axis——Ram’s up & down motion 
R axis——Back gauge’s up & down motion
X axis——Back gauge’s backward and front motion 
V axis——Auto crowning (mechanocal) 
*REMARK: Subject to alteration. Only specifications in our offer and order confirmation are binding.
X Axis Repositiong Accuracy

≤0.05 mm
R Axis Repositiong Accuracy

≤0.05 mm
R Axis Range

150 mm/s
R Axis Max.Speed

150 mm/s
ASK FOR THE BEST PRICE
Send Us A Message

Tel: +86-0757-86401007
WhatsApp: +86-13434117128